The US BIS Affiliates Rule, which would extend Entity List limits to firms 50 percent owned by listed parties, stays suspended until 10 January 2027. For Mexico’s server and EMS lines, 58 Walsin Technology (Walsin) MLCC at 1 µF or more are on the shelf in Hong Kong. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited wrote this for buyers, trade-compliance staff and component engineers at server, EMS and electronics plants in Guadalajara, Monterrey, Tijuana, Ciudad Juarez and Queretaro. The BIS Affiliates Rule is a US export-control rule about who you may ship to, not about which capacitor sits on a board, and this post is perspective rather than legal or export-control advice: confirm with your compliance team how it applies to your products, customers and suppliers. On 20 November 2026 we matched our ready-stock snapshot dated 9 November 2026 against Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) and counted the high-capacitance lines held on our shelf in Hong Kong.
What is the BIS Affiliates Rule and what changed in November 2026?
A 50 percent ownership rule whose suspension now runs to 10 January 2027. Thompson Hine wrote on 6 November 2026 that BIS announced on 5 November an extension of the suspension of its Affiliates Rule, which was set to expire on 9 November 2026 and now runs through 10 January 2027.
Thompson Hine describes the rule, first issued on 30 September 2025, as extending export-control restrictions to any entity owned 50 percent or more, individually or in aggregate, by parties on the Entity List or the Military End-User List, modelled on the OFAC 50 percent rule. Global Sanctions wrote on 9 November 2026 that, while the suspension lasts, Entity List licence requirements apply only to entities named on the list, and that once the rule takes effect exporters will need to check who owns their customers and other parties to a transaction.
Why does the BIS Affiliates Rule matter to electronics plants in Mexico?
Because Mexico now builds a large share of the servers the USA buys. Mexico News Daily reported on 5 November 2026, citing US Census Bureau data, that US imports from Mexico reached nearly 481.6 billion US dollars in January to September 2026, up 20.7 percent, with growth driven by information-processing equipment, servers and electronic components.
Many of those plants import US-origin chips, build them into boards and ship the result onward, which makes them exporters in their own right. Passive components travel on the same purchase orders and the same supplier file covers them. We make no claim about any company’s customers, suppliers or export-control position. Our explainer on what an authorised distributor means and how to verify one covers the supplier side.
What should a passive component buyer in Mexico check before 10 January 2027?
Three records per supplier, kept current. Before the suspension ends, a buyer can confirm for each passive-component supplier its legal owner, its authorisation status with the maker, and the maker and country of origin printed on each certificate of conformance; your compliance team then decides what screening the rule requires.
First, ownership: ask distributors and brokers for their ownership structure in writing, and keep it with the supplier record. Second, authorisation: a part bought through a maker’s authorised channel comes with a traceable chain back to the factory and the maker’s datasheet revision; a broker part may not. Third, classification: whether an item is subject to US export rules, and how it is classified, is a statement for the maker and your compliance team, not for a distributor’s sales sheet. Our guide on building a BOM that survives a shortage shows how to hold that second source ready.
Which Walsin high-capacitance MLCC are on the shelf in Hong Kong?
58 lines at 1 µF or more. We counted 58 distinct Walsin MLCC part numbers at 1 µF or more on our shelf in Hong Kong (snapshot 9 November 2026): 2 in 0201, 9 in 0402, 13 in 0603, 12 in 0805, 14 in 1206 and 8 in 1210; 34 are X5R, 23 X7R and 1 X6S.
| Case size | Lines at 1 µF or more on our shelf | Highest value on the shelf | Rated voltages on the shelf |
|---|---|---|---|
| 0201 | 2 | 2.2 µF | 6.3 V |
| 0402 | 9 | 22 µF | 6.3 V to 25 V |
| 0603 | 13 | 22 µF | 6.3 V to 25 V |
| 0805 | 12 | 47 µF | 6.3 V to 50 V |
| 1206 | 14 | 47 µF | 6.3 V to 100 V |
| 1210 | 8 | 100 µF | 6.3 V to 100 V |
Fifty-six are Walsin General Purpose parts and two are Soft Termination (SH series) parts, SH31B475K500 and SH32B335K500, for boards that flex. By voltage, 18 are 6.3 V, 12 are 10 V, 12 are 25 V, 9 are 50 V, 5 are 16 V and 2 are 100 V. As at 9 November 2026 that covers the core-rail and point-of-load end of a server board; browse the full MLCC range for the rest. We have not seen our shelf counted this way anywhere else.
Which shelf MLCC match a typical Mexican server-board brief?
Six of eight common briefs match from the shelf. We set eight typical server and networking-board capacitor briefs, from 22 µF in 0402 to 100 µF in 1210, against the shelf snapshot dated 9 November 2026: six matched a Walsin part on every listed field, and two did not.
| Server-board brief | Walsin part on our shelf | Case | Capacitance | Dielectric | Rated V | Match / mismatch with the brief |
|---|---|---|---|---|---|---|
| 22 µF, 0402, X5R, 6.3 V, core rail | 0402X226M6R3 |
0402 | 22 µF | X5R | 6.3 V | Match |
| 10 µF, 0603, X5R, 6.3 V | 0603X106K6R3 |
0603 | 10 µF | X5R | 6.3 V | Match |
| 22 µF, 0603, X5R, 6.3 V | 0603X226M6R3 |
0603 | 22 µF | X5R | 6.3 V | Match |
| 47 µF, 0805, X5R, 6.3 V | 0805X476M6R3 |
0805 | 47 µF | X5R | 6.3 V | Match |
| 100 µF, 1210, X5R, 6.3 V, bulk | 1210X107M6R3 |
1210 | 100 µF | X5R | 6.3 V | Match |
| 10 µF, 0805, X5R, 25 V, 12 V input | 0805X106K250 |
0805 | 10 µF | X5R | 25 V | Match |
| 10 µF, 0805, X7R, 25 V | 0805B106K100 |
0805 | 10 µF | X7R | 10 V | Mismatch: 10 V; 1210B106K250 is X7R 25 V but in 1210 |
| 1 µF, 0402, X7R, 16 V | 0402B105K6R3 |
0402 | 1 µF | X7R | 6.3 V | Mismatch: 6.3 V; request a quote for a higher-voltage Walsin part |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
“On our shelf in Hong Kong (snapshot 9 November 2026)” means held on that date, not a promise of quantity or date code today. Anything not on the shelf is to order: request a quote and we source it through our authorised Walsin channel. Through our supplier network in Hong Kong we also source most other passive brands on request, including Murata, Samsung and Yageo, and every quote says whether a line is on our shelf or network stock.
Check the datasheet. At 6.3 V and 22 µF or more, DC bias takes a large share of the rated value. The export gives rated values, not bias curves; compare the curves on Walsin’s datasheet with your incumbent part’s datasheet before you swap. Our note on MLCC DC bias and voltage derating explains the effect.
How Venatech helps
How Venatech helps is an authorised, documented source for the passive lines. Venatech Limited is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and our snapshot dated 9 November 2026 holds 58 Walsin MLCC at 1 µF or more on our shelf in Hong Kong.
Paste a line into the cross-reference tool, upload a BOM, check the ready-stock list and request a quote through the site. We are Hong Kong-based, quote small lots for plants in Guadalajara, Monterrey, Tijuana, Ciudad Juarez and Queretaro, and state on each quote the maker, the origin on the certificate, the date code and the lead time, with no price, lead-time or stock promise before the quote is issued. Walsin is our authorised line. Questions about the BIS Affiliates Rule, the Entity List or export classification belong with your compliance team; we do not give export-control or customs advice.
The short version
BIS has extended the suspension of its Affiliates Rule to 10 January 2027, according to Thompson Hine and Global Sanctions; when it applies, exporters will need to check who owns their customers, not only whether they are listed. Mexico’s plants can use the time to tidy supplier records. For the capacitor side, 58 Walsin MLCC at 1 µF or more were on our shelf in Hong Kong on 9 November 2026, and six of eight server-board briefs matched.
Send us the bulk and decoupling capacitor lines of your next server build, and we will return the shelf parts with every field difference marked. Which line would you most like an authorised second source for?
Related reading
- What authorised distributor means and how to verify one
- Building a BOM that survives a shortage
- MLCC DC bias and voltage derating
- Cross-reference tool, BOM upload and ready-stock list
Last reviewed: 20 November 2026
Sources
Fetched 20 November 2026.
- Thompson Hine SmarTrade, “BIS extends Affiliates Rule until January 2027”, 6 November 2026: https://www.thompsonhinesmartrade.com/2026/11/bis-extends-affiliates-rule-until-january-2027/
- Global Sanctions, “US BIS extends suspension of 50% rule coming into force until 10 January 2027”, 9 November 2026: https://globalsanctions.com/2026/11/us-bis-extends-suspension-50-rule-coming-into-force-until-10-january-2027/
- Mexico News Daily, “Mexico’s trade surplus with the US jumped 26% in first nine months of the year”, 5 November 2026: https://mexiconewsdaily.com/business/mexicos-trade-surplus-with-the-us-jumped-26-in-first-nine-months-of-the-year/
- Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
<!– wp:rank-math/faq-block {"questions":[{"id":"faq-question-01","title":"When does the BIS Affiliates Rule take effect?","content":"Thompson Hine reported that BIS extended the suspension through 10 January 2027. Whether it applies after that date, and how, is a question to follow with your compliance team.","visible":true},{"id":"faq-question-02","title":"What does the BIS Affiliates Rule require of exporters in Mexico?","content":"As described by Thompson Hine, it would extend Entity List and Military End-User restrictions to entities owned 50 percent or more by listed parties. Global Sanctions notes exporters would need to check who owns their customers. Confirm your own obligations with your compliance team.","visible":true},{"id":"faq-question-03","title":"Are passive components covered by US export controls?","content":"Classification depends on the item and its maker, and the Entity List can apply to items regardless of classification. Ask the maker for the classification and your compliance team for the screening; we do not give export-control advice.","visible":true},{"id":"faq-question-04","title":"How many Walsin MLCC at 1 µF or more are on your shelf?","content":"We counted 58 Walsin MLCC at 1 µF or more on our shelf in Hong Kong in the snapshot dated 9 November 2026, from 0201 to 1210, including0402X226M6R3 at 22 µF and 1210X107M6R3 at 100 µF.”,”visible”:true},{“id”:”faq-question-05″,”title”:”Is the stock guaranteed?”,”content”:”No. The snapshot is dated 9 November 2026 and changes as reels are sold. We confirm availability, date code and lead time on each quote.”,”visible”:true},{“id”:”faq-question-06″,”title”:”Is Venatech an authorised Walsin distributor for buyers in Mexico?”,”content”:”Venatech Limited is an authorised Walsin distributor in Hong Kong and serves plants in Mexico in small lots. Walsin is the line we are authorised for; other brands we source on request.”,”visible”:true}],”listStyle”:””,”titleWrapper”:”h3″,”titleCssClasses”:””,”contentCssClasses”:””,”sizeSlug”:””} –>
When does the BIS Affiliates Rule take effect?
Thompson Hine reported that BIS extended the suspension through 10 January 2027. Whether it applies after that date, and how, is a question to follow with your compliance team.
What does the BIS Affiliates Rule require of exporters in Mexico?
As described by Thompson Hine, it would extend Entity List and Military End-User restrictions to entities owned 50 percent or more by listed parties. Global Sanctions notes exporters would need to check who owns their customers. Confirm your own obligations with your compliance team.
Are passive components covered by US export controls?
Classification depends on the item and its maker, and the Entity List can apply to items regardless of classification. Ask the maker for the classification and your compliance team for the screening; we do not give export-control advice.
How many Walsin MLCC at 1 µF or more are on your shelf?
We counted 58 Walsin MLCC at 1 µF or more on our shelf in Hong Kong in the snapshot dated 9 November 2026, from 0201 to 1210, including 0402X226M6R3 at 22 µF and 1210X107M6R3 at 100 µF.
Is the stock guaranteed?
No. The snapshot is dated 9 November 2026 and changes as reels are sold. We confirm availability, date code and lead time on each quote.
Is Venatech an authorised Walsin distributor for buyers in Mexico?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves plants in Mexico in small lots. Walsin is the line we are authorised for; other brands we source on request.