Rio Grande do Sul’s 87 industrial-automation makers earned 3.4 billion reais in 2025, up 12 percent, Jornal do Comércio reported on 16 November 2026. Their analogue I/O runs on precision resistors, and Walsin Technology (Walsin) lists 1,029 thick-film parts at 0.1 percent and 25 ppm. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for design engineers and buyers at industrial automation, instrumentation and grid-equipment makers in Brazil, with Rio Grande do Sul in mind. We make no claim about any named company’s suppliers or stock. The survey behind the news does say something useful for a buyer, though: more companies in the state reported component cost and supply pressure in September than in August. A precision resistor is one of the lines where a checked second source is worth having before it is needed. On 20 November 2026 we parsed all 79 files of Walsin’s chip-resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, 234,378 distinct part numbers) and checked them against our ready-stock snapshot dated 9 November 2026.
What did the Abinee-RS survey find about Rio Grande do Sul’s electronics industry?
Record 2025 revenue and a cautious 2026. Jornal do Comércio reported on 16 November 2026 that an Abinee-RS survey of 256 companies found 87 industrial-automation firms in Rio Grande do Sul earned 3.4 billion reais in 2025, up 12 percent against 7 percent nationally.
The same report says the state holds 6.7 percent of national electrical and electronics revenue, 18.2 billion reais of 270.8 billion, and that the sector is 2.4 percent of the state’s GDP. Generation, transmission and distribution equipment grew 40 percent in the state against 10 percent nationally, with exports of 261 million US dollars. Only 27 percent of companies expected sales growth in 2026, down from 76 percent in December 2025, while 64 percent expect growth in 2027. Porto Alegre, Canoas, Cachoeirinha, São Leopoldo and Gravataí hold the most sector companies. The report also notes that Italian group Gefran bought Canoas-based automation firm Novus in August for about two hundred and fifteen million reais.
Why does a component-supply concern raise a precision resistor question in Brazil?
Because the survey shows rising supply pressure. Jornal do Comércio reported that companies citing higher component and raw-material costs rose from 39 percent in August to 68 percent in September, and those reporting component shortages rose from 17 percent to 32 percent.
Those are survey answers across the state’s electronics firms, not a statement about any part or brand, and we read nothing more into them. For an automation designer they point to a sensible habit: know the second source for each critical line before purchasing has to ask. Precision resistors are a good place to start, because PLC analogue inputs, 4–20 mA loops, transmitters and power-meter front ends depend on them for accuracy, and a substitute that matches tolerance but not temperature coefficient (TCR) drifts as the cabinet warms. Our comparison of high-precision thick film and thin film explains when thick film is enough.
How many Walsin thick-film precision resistors reach 0.1 percent and 25 ppm?
One thousand and twenty-nine. We parsed 52,027 distinct parts in Walsin’s High Precision Thick Film group and counted 16,103 at ±0.1 percent; 1,029 of those reach ≤±25 ppm/°C, all in the TC25 series, in 0603, 0805 and 1206.
| Walsin high-precision thick film, ±0.1% | Part numbers | TCR | Cases | Resistance range |
|---|---|---|---|---|
| TC25 series (WFxxJ) | 1,029 | ≤±25 ppm/°C | 0603, 0805, 1206 (343 each) | 470 Ω to 470 kΩ |
| TC50 and TC50 Automotive series | 4,340 | ≤±50 ppm/°C | 0402 to 1206 | includes 249 Ω |
| TC100 and other series | 10,734 | ≤±100 ppm/°C or wider | 0201 to 2512 | wide |
| Total at ±0.1% | 16,103 |
So 5,369 Walsin thick-film parts combine ±0.1 percent with ≤±50 ppm/°C. The TC25 series also comes at ±0.25 and ±0.5 percent, 1,029 parts each, with rated power of 0.1 W in 0603, 0.125 W in 0805 and 0.25 W in 1206. We have not seen this cut counted anywhere else. The chip resistor range holds the full high-precision set.
Which precision resistor fits a PLC analogue input?
Match tolerance and TCR together. For a gain or ratio pair on a PLC analogue input, a TC25 part at ±0.1 percent and ≤±25 ppm/°C keeps a matched pair within about 50 ppm of ratio drift across a 1 °C to 2 °C mismatch; a 249 Ω loop-sense resistor comes from the TC50 series.
| Walsin part | Series | Case | Resistance | Tolerance | TCR | Match / mismatch for a PLC analogue input or 4–20 mA loop built in Brazil | Your incumbent |
|---|---|---|---|---|---|---|---|
WF06J1002BTL |
TC25 | 0603 | 10 kΩ | ±0.1% | ≤±25 ppm/°C | Match for an op-amp gain or ratio pair | |
WF08J2491BTL |
TC25 | 0805 | 2.49 kΩ | ±0.1% | ≤±25 ppm/°C | Match for an ADC input divider | |
WF12J1003BTL |
TC25 | 1206 | 100 kΩ | ±0.1% | ≤±25 ppm/°C | Match for the top of a 24 V input divider; check working voltage | |
WF06K2490BTL |
TC50 | 0603 | 249 Ω | ±0.1% | ≤±50 ppm/°C | Match for a 4–20 mA sense resistor (1 V to 5 V) | |
WF12H1202BTL |
TC100 | 1206 | 12 kΩ | ±0.1% | ≤±100 ppm/°C | Match where ±100 ppm/°C drift is in budget | |
WF04H1202DTL |
TC100 | 0402 | 12 kΩ | ±0.5% | ≤±100 ppm/°C | Mismatch for a 0.1% ratio; fits a bias or pull-up |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Add your incumbent and compare tolerance, TCR and power. Check the datasheet. The export gives tolerance, TCR and rated power, but the working-voltage limit and long-term stability figures come from Walsin’s sheets (ASC_WFxxJ.pdf for TC25, ASC_WFxxK.pdf for TC50). Our note on thick film vs thin film and the TCR crossover and our divider ratio accuracy guide cover ratio budgets.
Which precision parts are on the shelf in Hong Kong?
Five lines, all ±100 ppm/°C. We checked all 52,027 Walsin high-precision thick-film parts against our ready-stock snapshot dated 9 November 2026; five were on our shelf in Hong Kong, three at ±0.1 percent and two at ±0.5 percent, and the TC25 and TC50 parts are supplied to order.
The five on our shelf in Hong Kong (snapshot 9 November 2026) are WF12H1202BTL, WF12H5762BTL and WF08H8203BTL at ±0.1 percent, and WF04H1202DTL and WF04H3302DTL at ±0.5 percent. For TC25 and TC50 lines, request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. Through our supplier network in Hong Kong we also source thin-film and other brands’ precision resistors on request; Walsin is the line we are authorised for.
How Venatech helps
How Venatech helps is a second source you can check on paper first. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an incumbent precision resistor returns Walsin candidates with tolerance, TCR and case stated.
Paste the part numbers into the cross-reference tool, or upload the analogue board BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve buyers in Brazil in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.
The short version
Jornal do Comércio reported on 16 November 2026 that Rio Grande do Sul’s 87 automation makers earned 3.4 billion reais in 2025, up 12 percent, while reports of component shortages in the state’s survey rose from 17 to 32 percent between August and September. Precision resistors decide analogue accuracy. Walsin lists 16,103 thick-film parts at ±0.1 percent, 1,029 of them at ≤±25 ppm/°C in the TC25 series.
Send us the precision resistors from your analogue I/O and we will return Walsin crosses with tolerance and TCR stated. Which 0.1 percent resistor in your design has no checked second source?
Related reading
- High-precision thick film vs thin film
- Thick film vs thin film precision resistor: the TCR crossover
- Precision resistor divider ratio accuracy
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 20 November 2026
Sources
Fetched 20 November 2026.
- Jornal do Comércio, “Radiografia da indústria eletroeletrônica gaúcha”, 16 November 2026: https://www.jornaldocomercio.com/especiais/nova-economia-do-rs/2026/11/1270017-radiografia-da-industria-eletroeletronica-gaucha.html
- Walsin chip-resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, re-measured 20 November 2026; datasheets ASC_WFxxJ.pdf and ASC_WFxxK.pdf; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
How big is Rio Grande do Sul’s industrial-automation sector?
87 companies in the Abinee-RS survey earned 3.4 billion reais in 2025, up 12 percent against 7 percent nationally, Jornal do Comércio reported on 16 November 2026.
What did the survey say about component supply in Brazil?
Companies reporting component shortages rose from 17 percent in August to 32 percent in September, and those citing higher component and raw-material costs rose from 39 to 68 percent.
What is a precision resistor?
A resistor with a tight tolerance, such as ±0.1 percent, and a low temperature coefficient, such as ≤±25 ppm/°C, so its value starts close to nominal and drifts little with temperature.
How many Walsin thick-film resistors reach 0.1 percent and 25 ppm?
We counted 1,029 distinct part numbers in the TC25 series, in 0603, 0805 and 1206, from 470 Ω to 470 kΩ. 5,369 parts combine ±0.1 percent with ≤±50 ppm/°C.
Which Walsin resistor suits a 249 Ω 4–20 mA sense position?
The TC50 series lists 249 Ω at ±0.1 percent and ≤±50 ppm/°C, for example WF06K2490BTL in 0603. The TC25 series starts at 470 Ω.
Are Walsin precision resistors in stock in Hong Kong for buyers in Brazil?
Five high-precision thick-film lines were on our shelf in Hong Kong in the snapshot dated 9 November 2026. TC25 and TC50 parts are supplied to order; request a quote and we confirm availability, date code and lead time.