Samsung Electro-Mechanics added MLCCs to its Nvidia supply agreement on 18 November 2026, The Korea Times reported, citing a 40 percent share of AI-server MLCC. For Korean board makers who need a high temperature MLCC, Walsin lists 167 parts at 10 µF or more rated 105 °C or higher. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware and component engineers, and their buyers, at South Korean makers of server boards, memory modules, accelerator cards and the EMS lines that build them. This is one company’s supply news, and we make no claim about any Korean maker’s orders or about who supplies whom beyond what the report says. The engineering point it raises is wider: AI servers use far more MLCC than ordinary servers, and many of those parts sit in hot places, next to accelerators and voltage regulators. On 20 November 2026 we re-measured the MLCC export of Walsin Technology (Walsin), Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx with 23,360 part numbers, sorted it by rated temperature, and checked it against our ready-stock snapshot dated 9 November 2026.
What did Samsung Electro-Mechanics announce on 18 November?
A wider Nvidia deal that now includes MLCC. The Korea Times reported on 18 November 2026 that Samsung Electro-Mechanics (SEMCO) revised its Nvidia supply agreement that day to add more advanced package substrates and MLCCs for Nvidia’s AI computing platforms, with no financial terms disclosed.
According to the report, SEMCO holds an estimated 40 percent share of the MLCC market for AI servers, and an AI server needs more than 10 times as many MLCCs as a conventional server. The article says Nvidia is considering additional funding for production infrastructure at SEMCO’s Sejong and Busan plants, following an October commitment, and that SEMCO plans full-scale mass production from 2029. It describes the MLCCs only as high-performance products that tolerate high temperatures and voltages. We take only those facts from it, and nothing here is investment advice.
Why does a high temperature MLCC matter on an AI server board?
Because the board runs hot where the capacitors sit. On an accelerator or server board, bulk and decoupling MLCC sit within millimetres of processors and power stages that run well above room temperature, so the dielectric’s rated temperature, 85 °C for X5R, 105 °C for X6S and 125 °C for X7R or X7S, decides how much capacitance is left at the hot spot.
A high temperature MLCC is not a different kind of part; it is a Class II dielectric specified over a wider range. X5R allows ±15 percent capacitance change from −55 to 85 °C; X6S keeps a looser ±22 percent but holds it to 105 °C; X7R holds ±15 percent to 125 °C. Above 125 °C, Walsin’s High Temperature (HT) series moves to X8 classes rated to 150 °C. With ten times the MLCC count of a conventional server, the choice between an 85 °C and a 105 °C part repeats hundreds of times per board. Our explainer on high-temperature MLCC to 150 °C, the HT series covers the X8 end.
How many Walsin MLCC at 10 µF or more are rated 105 °C or higher?
One hundred and sixty-seven. We parsed all 23,360 rows of Walsin’s MLCC export and found 287 distinct part numbers at 10 µF or more; 167 of them are rated 105 °C or higher: 112 X7R, 49 X6S and 6 X7S.
Across the whole export, the rated-temperature ladder looks like this:
| Rated temperature | Dielectrics in the export | Part numbers (all values) | Part numbers at 10 µF or more |
|---|---|---|---|
| 85 °C | X5R | 723 | 120 |
| 105 °C | X6S | 125 | 49 |
| 125 °C | X7R, X7S, X7T, C0G | 22,277 | 118 |
| 150 °C | X8G, X8R | 235 | 0 |
| Total | 23,360 | 287 |
The 150 °C parts are 128 High Temperature (HT) series, 104 Microwave (RF) series and 3 AEC-Q200 automotive parts, and they stop at 100 nF, so they serve filtering and RF positions rather than bulk decoupling. For 10 µF and up, X6S and X7R are the high-temperature choices. In 0805, the export has 10 µF X6S parts to 25 V and 22 µF X6S parts to 16 V. We have not seen this ladder counted anywhere else. The MLCC range lists every series.
Which 10 µF part fits a 105 °C brief in 0805?
Six of the eight candidates below. Against a brief of 10 µF or more, 16 V or more, rated 105 °C or higher, in 0805, six Walsin parts match on every field; two parts we hold on our shelf miss on voltage or temperature.
| Walsin part | Case | Dielectric | Value | Rated voltage | Rated to | Match / mismatch for 10 µF+, 16 V+, 105 °C+, 0805 | Your incumbent |
|---|---|---|---|---|---|---|---|
0805S106K160 |
0805 | X6S | 10 µF | 16 V | 105 °C | Match | |
0805S106K250 |
0805 | X6S | 10 µF | 25 V | 105 °C | Match, more DC-bias headroom | |
0805A106K160 |
0805 | X7S | 10 µF | 16 V | 125 °C | Match | |
0805A106K250 |
0805 | X7S | 10 µF | 25 V | 125 °C | Match | |
0805B106M160 |
0805 | X7R | 10 µF | 16 V | 125 °C | Match, ±15 percent class | |
0805S226M160 |
0805 | X6S | 22 µF | 16 V | 105 °C | Match, double the value | |
0805B106K100 |
0805 | X7R | 10 µF | 10 V | 125 °C | Mismatch on voltage; on our shelf | |
0805X106K250 |
0805 | X5R | 10 µF | 25 V | 85 °C | Mismatch on temperature; on our shelf |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Put your incumbent in the last column and compare dielectric, voltage, tolerance and thickness on both datasheets. If 0603 is the target, 0603S106M160 (X6S, 10 µF, 16 V) is the same brief one size down. All the parts above come from Walsin’s WTC_MLCC_General_Purpose.pdf; the X8 parts are in WTC_MLCC_High_Temperature_HT.pdf.
Check the datasheet. Rated temperature tells you the window, not the capacitance left at your rail voltage and hot-spot temperature together. Read the DC-bias and temperature curves on the datasheet, and see our note on MLCC DC bias and voltage derating. Qualify any change in your own circuit, including a thermal check at full load.
Which Walsin high-temperature lines are on the shelf in Hong Kong?
Two at 10 µF and three at 150 °C. We checked the 167 parts and the 235 parts rated to 150 °C against our ready-stock snapshot dated 9 November 2026: 0805B106K100 and 1210B106K250 (X7R, 10 µF) and HT21G331K500, HT21G472K500 and RF21G8R2C251 (X8G, 150 °C) are on our shelf in Hong Kong (snapshot 9 Nov 2026).
On our shelf in Hong Kong (snapshot 9 Nov 2026) means those lines were held on that date; it is not a promise of quantity or date code today. The X6S and X7S parts in the table are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote.
How Venatech helps
How Venatech helps is a second source mapped before allocation talks start. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a list of incumbent server-board MLCC returns Walsin candidates with dielectric, voltage and temperature differences stated.
Paste your part numbers into the cross-reference tool, or upload the full board BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists the capacitors, resistors and inductors on our shelf in Hong Kong. We are Hong Kong-based, serve Korean buyers in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.
The short version
Samsung Electro-Mechanics added MLCCs to its Nvidia supply agreement on 18 November 2026, The Korea Times reported, citing an estimated 40 percent share of AI-server MLCC and more than ten times the MLCC count per server. Many of those parts sit in hot spots, so the high temperature MLCC question is a real one. Walsin lists 167 parts at 10 µF or more rated 105 °C or higher; six match an 0805 brief at 16 V, and two 10 µF X7R lines were on our Hong Kong shelf on 9 November 2026.
Send us the bulk-capacitor list from your server or module board and we will return Walsin crosses with temperature class stated. Which capacitor on that board sits closest to the hottest component?
Related reading
- High-temperature MLCC to 150 °C: the HT series
- Passives for AI server power stages
- MLCC DC bias and voltage derating
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 20 November 2026
Sources
Fetched 20 November 2026.
- The Korea Times, “Samsung Electro-Mechanics expands substrate, MLCC supply to Nvidia”, 18 November 2026: https://koreatimes.co.kr/business/companies/20261118/samsung-electro-mechanics-expands-substrate-mlcc-supply-to-nvidia
- Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026; Walsin datasheets WTC_MLCC_General_Purpose.pdf, WTC_MLCC_High_Temperature_HT.pdf and WTC_MLCC_Microwave_RF.pdf; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
<!– wp:rank-math/faq-block {"questions":[{"id":"faq-question-01","title":"What did Samsung Electro-Mechanics agree with Nvidia on 18 November 2026?","content":"The Korea Times reported that SEMCO revised its Nvidia supply agreement to add more advanced package substrates and MLCCs for Nvidia's AI platforms. No financial terms were disclosed.","visible":true},{"id":"faq-question-02","title":"What counts as a high temperature MLCC?","content":"A Class II MLCC rated above the usual 85 °C: X6S to 105 °C, X7R and X7S to 125 °C, and X8 classes to 150 °C. Walsin's HT series covers the 150 °C range.","visible":true},{"id":"faq-question-03","title":"How many Walsin MLCC at 10 µF or more are rated 105 °C or higher?","content":"We counted 167 distinct part numbers: 112 X7R, 49 X6S and 6 X7S. Another 120 parts at 10 µF or more are X5R, rated to 85 °C.","visible":true},{"id":"faq-question-04","title":"Which Walsin 10 µF 0805 part is rated to 125 °C at 25 V?","content":"0805A106K250, an X7S part, is 10 µF, 25 V and rated to 125 °C. 0805S106K250 is the X6S part at 105 °C.”,”visible”:true},{“id”:”faq-question-05″,”title”:”Are Walsin high temperature MLCC in stock in Hong Kong for South Korea buyers?”,”content”:”Two 10 µF X7R lines and three 150 °C X8G lines were on our shelf in Hong Kong in the snapshot dated 9 November 2026. Others are sourced through our authorised Walsin channel.”,”visible”:true},{“id”:”faq-question-06″,”title”:”Is Venatech an authorised Walsin distributor for buyers in South Korea?”,”content”:”Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in South Korea in small lots. Stackpole and Viking are lines we supply, not authorised lines.”,”visible”:true}],”listStyle”:””,”titleWrapper”:”h3″,”titleCssClasses”:””,”contentCssClasses”:””,”sizeSlug”:””} –>
What did Samsung Electro-Mechanics agree with Nvidia on 18 November 2026?
The Korea Times reported that SEMCO revised its Nvidia supply agreement to add more advanced package substrates and MLCCs for Nvidia’s AI platforms. No financial terms were disclosed.
What counts as a high temperature MLCC?
A Class II MLCC rated above the usual 85 °C: X6S to 105 °C, X7R and X7S to 125 °C, and X8 classes to 150 °C. Walsin’s HT series covers the 150 °C range.
How many Walsin MLCC at 10 µF or more are rated 105 °C or higher?
We counted 167 distinct part numbers: 112 X7R, 49 X6S and 6 X7S. Another 120 parts at 10 µF or more are X5R, rated to 85 °C.
Which Walsin 10 µF 0805 part is rated to 125 °C at 25 V?
0805A106K250, an X7S part, is 10 µF, 25 V and rated to 125 °C. 0805S106K250 is the X6S part at 105 °C.
Are Walsin high temperature MLCC in stock in Hong Kong for South Korea buyers?
Two 10 µF X7R lines and three 150 °C X8G lines were on our shelf in Hong Kong in the snapshot dated 9 November 2026. Others are sourced through our authorised Walsin channel.
Is Venatech an authorised Walsin distributor for buyers in South Korea?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in South Korea in small lots. Stackpole and Viking are lines we supply, not authorised lines.