The China RoHS 2026 catalogue adds 23 product groups, including power banks, servers and routers, with enforcement for them from 1 August 2027. For makers in China, Walsin Technology (Walsin) lists 1,188 metal current-sense resistors for battery and power boards. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited wrote this for compliance, hardware and component engineers, and the buyers who work with them, at power bank, server, networking, wearable and small-appliance makers in Shenzhen, Dongguan, Suzhou, Guangzhou and Chengdu. It explains what the published sources say about the China RoHS 2026 catalogue and the checks a buyer can make on passive components. It is perspective, not legal advice: confirm how the rules apply to your products with your compliance team. On 19 November 2026 we re-measured Walsin’s chip-resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, 234,378 part numbers) and checked it against our ready-stock snapshot dated 9 November 2026.
What does the China RoHS 2026 catalogue change?
It grows the catalogue to 33 product categories. SESEC reported on 23 June 2026 that MIIT and seven other bodies released the revised China RoHS catalogue and exemption list on 28 May 2026, consolidating the original 12 product types into 10 categories and adding 23 new product groups.
The same SESEC summary lists ten restricted substances under GB 26572-2025: lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs and four phthalates (DEHP, BBP, DBP and DIBP). Cadmium is capped at 0.01 percent by weight and the other nine at 0.1 percent. Covered products go through either state-recommended voluntary certification or self-declaration, with results recorded on the public China RoHS platform. On the exemption list, SESEC counts six exemptions removed, one updated under the Minamata Convention on Mercury, ten refined and six added. That last point matters to anyone whose parts rely on an exemption, and it is why the checks below start with documents rather than parts.
Which products join the China RoHS catalogue from 1 August 2027?
23 new product groups, from power banks to servers. SGS wrote on 11 June 2026 that the additions include portable power banks, microwave ovens, rice cookers, projectors, smart watches, earphones, smart speakers, robot vacuums, smart locks, servers, network switches and routers, electric toys, desk lamps, blood pressure monitors, glucose meters and hearing aids.
SGS and SESEC both put mandatory enforcement for the new groups at 1 August 2027, in line with GB 26572-2025, while the original categories apply from publication. For a factory in the Pearl River Delta that builds power banks or server sub-assemblies, that leaves a little over eight months from today to gather substance data for every part on the bill of materials, passives included. Our note on RoHS exemption paperwork for chip resistors shows why that data takes time to collect. We make no claim about any company’s compliance status.
What should a buyer in China check on passive components before 1 August 2027?
Three documents per part, not one. A capacitor or resistor on a power bank board is a small share of the mass but a full line on the substance declaration, so the buyer needs the manufacturer’s RoHS declaration, a material composition or test record where the declaration relies on one, and a check against the 2026 exemption list.
First, ask for the manufacturer’s declaration for each part number, not for a series brochure. Second, find out whether any declaration relies on an exemption, for example lead in the glass of a thick-film resistor element, and check that the exemption is still on the 2026 list after the removals and refinements SESEC describes. Third, keep lot and date codes on your goods-in records, so a declaration can be matched to the parts actually built in. A useful detail from our own data: the Termination column of Walsin’s chip-resistor export reads “Sn base (Lead free)” on all 234,378 rows we parsed. That describes the terminations only. It is not a statement about the whole part, so ask for Walsin’s declaration as well. Our guide to certificates of conformity, lot codes and date codes covers the records side.
How many Walsin current-sense resistors suit a power bank?
855 metal parts at 20 milliohm or below. We parsed Walsin’s chip-resistor export and counted 11,616 low-ohm current-sense part numbers: 10,428 thick film and 1,188 metal; 855 of the metal parts are 20 milliohm or below, and 213 sit exactly at 5, 10 or 20 milliohm.
A power bank’s protection and fuel-gauge circuit typically reads charge and discharge current across a shunt of a few milliohms, so the metal parts are the natural starting point: their TCR in the export is 50 to 150 ppm/°C, against up to 1,000 ppm/°C for some thick-film low-ohm parts. Of the 1,188 metal parts, 625 are 2512, 375 are 1206 and 61 are 0805, and 418 carry an AEC-Q200 tag. We have not seen this cut counted anywhere else.
| Power-bank shunt brief | Walsin part | Case | Resistance | Technology | Rated power | TCR (ppm/°C) | Match / mismatch with the brief |
|---|---|---|---|---|---|---|---|
| 10 mΩ, 1%, 1206, at least 0.5 W, low TCR | WW12DR010FTL |
1206 | 10 mΩ | Metal | 1 W | ≤ ±50 | Match |
| 10 mΩ, 1%, 1206, at least 0.5 W, low TCR | WW12WR010FTL |
1206 | 10 mΩ | Thick film | 1/3 W | ≤ ±1000 | Mismatch: power and TCR |
| 20 mΩ, 1%, 1206, at least 0.5 W | WW12DR020FTL |
1206 | 20 mΩ | Metal | 1 W | ≤ ±50 | Match |
| 10 mΩ, 1%, 0805, at least 0.5 W | WW08DR010FTL |
0805 | 10 mΩ | Metal | 0.75 W | ≤ ±50 | Match |
| 20 mΩ, 1%, 0805, at least 0.5 W | WW08CR020FTL |
0805 | 20 mΩ | Thick film | 1/3 W | 0 to 250 | Mismatch: power below brief |
| 5 mΩ, 1%, 2512, high-current output | WW25AR005FTL |
2512 | 5 mΩ | Metal | 3 W | ≤ ±70 | Match |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Check Walsin’s datasheet for pad layout and the four-terminal (Kelvin) option before you swap a shunt, and qualify the part in your own circuit. Our comparison of thick film and metal low-ohm current-sense resistors explains the trade.
Which Walsin current-sense resistors are on the shelf in Hong Kong?
Three, all 0805 thick film. We checked all 11,616 current-sense part numbers against our ready-stock snapshot dated 9 November 2026: three are on our shelf in Hong Kong, WW08WR270FTL, WW08WR390FTL and WW08WR470FTL, at 0.27, 0.39 and 0.47 ohm, 1 percent and 1/4 W.
Those three suit low-current sensing such as a charger input or an LED string, not the main battery path of a power bank, where the brief above calls for a few milliohms. The milliohm parts in the table are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. As at 9 November 2026, the same snapshot lists 191 Walsin chip resistors in all on our shelf in Hong Kong, and the power rating of each is on Walsin’s datasheet. “On our shelf in Hong Kong (snapshot 9 November 2026)” means held on that date, not a promise of quantity today.
How Venatech helps
How Venatech helps is part-level data you can file. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a power bank or server BOM returns Walsin candidates with every field difference stated before you collect declarations.
Paste the shunts and other passives into the cross-reference tool, or upload the whole BOM and request a quote through the site; browse the chip resistor range by series. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve Shenzhen, Dongguan and the wider Pearl River Delta in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line. For anything about China RoHS scope, exemptions or labelling, confirm with your compliance team.
The short version
The China RoHS 2026 catalogue, released on 28 May 2026 according to SESEC, adds 23 product groups including power banks, servers and routers, with enforcement for them from 1 August 2027. Collect a manufacturer declaration for every passive part and check any exemption it relies on against the 2026 list. For battery boards, Walsin lists 1,188 metal current-sense resistors, 855 of them at 20 milliohm or below.
Send us the shunt and passive lines from your power bank or server board, and we will return Walsin parts with value, power and TCR differences marked. Which part on that BOM is hardest to document today?
Related reading
- RoHS exemption paperwork for chip resistors
- Low-ohm current sense: thick film vs metal
- Certificates of conformity, lot codes and date codes
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 19 November 2026
Sources
Fetched 19 November 2026.
- SGS SafeGuardS 080/26, “China RoHS expansion adds 23 product categories to 2026 catalogue”, 11 June 2026: https://www.sgs.com/en/news/2026/06/safeguards-08026-china-rohs-expansion-adds-23-product-categories-to-2026-catalogue
- SESEC, “China Expands RoHS Scope to 33 Product Categories with New Substance Limits”, 23 June 2026: https://sesec.eu/?p=7940
- Walsin chip-resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, re-measured 19 November 2026; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
When does the China RoHS 2026 catalogue apply to power banks?
SGS and SESEC report that the 23 newly added product groups, including portable power banks, face mandatory enforcement from 1 August 2027. Confirm the dates for your products with your compliance team.
Are servers and network switches in the China RoHS 2026 catalogue?
Yes, according to SGS, servers, network switches and routers are among the added product groups. The same 1 August 2027 date applies to them.
Which substances does GB 26572-2025 restrict?
SESEC lists ten: lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs, DEHP, BBP, DBP and DIBP, with cadmium capped at 0.01 percent by weight and the others at 0.1 percent.
Does a lead-free termination make a chip resistor RoHS compliant?
No. All 234,378 rows in Walsin’s chip-resistor export list a lead-free termination, but that field covers the terminations only. Ask for the manufacturer’s declaration for each part number.
How many Walsin current-sense resistors suit a power bank in China?
We counted 1,188 Walsin metal current-sense resistors, 855 at 20 milliohm or below. Three thick-film current-sense parts were on our shelf in Hong Kong on 9 November 2026.
Is Venatech an authorised Walsin distributor for buyers in China?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Shenzhen, Dongguan and across China in small lots. Walsin is the line we are authorised for.