NEWS

High Voltage MLCC for Data Centre Power in Chile: AWS Switches On a Santiago Region, and 560 Walsin 1206 Capacitors Rated 630 V or More

AWS switched on its cloud region in Santiago on 11 November 2026, El Cronista reported on 18 November. Data-centre power runs on 400 V stages that need high voltage MLCC, and Walsin Technology (Walsin) lists 560 in 1206 rated 630 V or more, 27 on our Hong Kong shelf. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for power-electronics engineers, repair and maintenance teams and component buyers in Chile who work on UPS systems, rectifiers, PDUs and power supplies for data centres, telecom sites and grid-connected plants. A cloud region does not publish a bill of materials, and we make no claim about the equipment inside AWS’s facilities or who supplies it. The practical link is the power chain around any data centre: UPS and rectifier stages run on DC buses near 400 V, and the snubbers, resonant capacitors and clamps in them are high voltage MLCC. On 20 November 2026 we parsed Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 distinct part numbers) and checked every part at 630 V or more against our ready-stock snapshot dated 9 November 2026.

What did AWS switch on in Chile?

A cloud region with three data-centre zones. El Cronista reported on 18 November 2026 that Amazon Web Services switched on its region in Chile on 11 November 2026, with three data-centre zones in the Santiago Metropolitan Region, backed by more than 4 billion US dollars announced in 2025 to be spent over about 15 years.

The report says the region is available first to a group of customers and will open to others in the coming weeks, and that Chile is AWS’s third region in Latin America after Brazil, operating in São Paulo since 2011, and Mexico, opened in 2025. It reports that President José Antonio Kast welcomed the launch. We make no forecast about further phases or about any supplier. For an engineer in Chile the news is a marker: more critical power load is now running in the Santiago region, and the UPS, rectifier and distribution equipment that serves it needs spares, repairs and local integration work.

Why does a new cloud region matter to a high voltage MLCC buyer in Chile?

Because the power chain is full of 630 V and 1 kV positions. A double-conversion UPS or a rectifier with power-factor correction typically runs its DC bus near 400 V, which points to MLCC rated 630 V for snubbers and resonant stages and 1,000 V or more for flyback clamps and auxiliary supplies.

Those positions are where small MLCC fail first when the wrong rating goes in during a repair. Three checks decide a cross. The rated voltage must clear the bus with margin, including ringing. The dielectric matters: C0G holds its value under voltage and temperature, which suits resonant and timing positions, while X7R gives more capacitance in the same case for snubbers. And a high voltage MLCC is not a safety capacitor: anything placed across the mains as an X or Y capacitor needs a safety-certified part. Our guide to middle and high voltage MLCC from 200 V to 4 kV sets out the series.

How many Walsin 1206 MLCC are rated 630 V or more?

Five hundred and sixty. We counted 560 distinct Walsin 1206 MLCC in the Middle to High Voltage series rated 630 V or more, from 630 V to 2,500 V, out of 1,694 at 630 V or more across the 0805, 1206, 1210, 1808 and 1812 cases.

Rated voltage (1206) C0G/NP0 parts X7R parts X7R capacitance range Total
630 V 145 67 100 pF to 56 nF 212
1,000 V 137 67 100 pF to 22 nF 204
1,500 V 2 13 100 pF to 10 nF 15
2,000 V 79 37 100 pF to 3.3 nF 116
2,500 V 0 13 100 pF to 2.2 nF 13
Total 363 197 560

The ceiling falls as voltage rises: a 1206 X7R part reaches 56 nF at 630 V but 2.2 nF at 2,500 V, and the C0G parts at 630 V stop at 10 nF. That is the trade a repair engineer meets when a burnt part’s marking is unreadable and the value has to be inferred from the circuit. We have not seen this 1206 cut counted anywhere else. The MLCC range lists the larger 1808 and 1812 cases for higher values at the same voltages.

Which high voltage MLCC fits a 400 V power stage?

Start at 630 V for the bus and 1 kV for clamps. Every Walsin part in this table except the safety-capacitor row was on our shelf in Hong Kong on 9 November 2026, and each is a 1206 high voltage MLCC with an operating range of -55 °C to +125 °C in the export.

Walsin part Dielectric Capacitance Rated voltage Match / mismatch for a position on a 400 V UPS or rectifier stage serviced in Chile Your incumbent
1206B473K631 X7R 47 nF 630 V Match for an RC snubber across a switch on a 400 V bus
1206B153K631 X7R 15 nF 630 V Match for a smaller snubber or bus filtering
1206N150J631 C0G/NP0 15 pF 630 V Match for a resonant or timing trim that must hold its value
1206B103K102 X7R 10 nF 1,000 V Match for a flyback primary clamp in an auxiliary supply
1206B472J152 X7R 4.7 nF 1,500 V Match where ringing pushes past 1 kV
1206B471K252 X7R 470 pF 2,500 V Match for a high-voltage sense or snubber position
1206B473K631 X7R 47 nF 630 V Mismatch on an 800 V DC bus; step up to 1,000 V or more
S242B102K502 X7R 1 nF S2 safety series, 1808 Match across the mains as a Y capacitor, where no 1206 high voltage part fits

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Write your incumbent in the last column and compare voltage, dielectric and case. Check the datasheet. Walsin’s Middle and High Voltage sheet (WTC_MLCC_Middle_and_High_Voltage.pdf) carries the thickness and the derating notes the export leaves out, and a thicker part may not fit the original pad. For mains positions use the S2 safety-certified series and its own datasheet. Our note on the high voltage MLCC capacitance limit explains why value falls so fast with voltage.

Which 1206 high voltage parts are on the shelf in Hong Kong?

Twenty-seven of the 560. We checked all 560 Walsin 1206 MLCC rated 630 V or more against our ready-stock snapshot dated 9 November 2026: 27 were on our shelf in Hong Kong: 10 at 630 V, 13 at 1,000 V, 2 at 1,500 V, 1 at 2,000 V and 1 at 2,500 V.

Across all five cases, 80 of the 1,694 parts at 630 V or more were on the shelf on the same date. Repair and spares work in Chile usually needs a few reels, not a production lot, which suits a shelf line. For the rest, request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. Our ready-stock snapshot lists every shelf line with its date.

How Venatech helps

How Venatech helps is a cross you can check before the board goes back in service. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an incumbent high voltage capacitor returns Walsin candidates with voltage, dielectric and case stated.

Paste the part numbers into the cross-reference tool, or upload a repair or build BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve buyers in Chile in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.

The short version

AWS switched on its Santiago region on 11 November 2026, El Cronista reported, with three data-centre zones and more than 4 billion US dollars announced for the build and operation. The power chain around data centres runs on 400 V stages. Walsin lists 560 1206 high voltage MLCC rated 630 V to 2,500 V, and 27 were on our shelf in Hong Kong on 9 November 2026.

Send us the high voltage capacitors from your UPS or rectifier boards and we will return Walsin crosses with voltage and dielectric stated. Which snubber capacitor on your 400 V bus is rated only 500 V?

Related reading

Last reviewed: 20 November 2026

Sources

Fetched 20 November 2026.

  • El Cronista, report on the AWS region in Chile, 18 November 2026 (updated 19 November 2026): https://www.cronista.com/en/today/official-the-us-will-invest-more-than-4-billion-to-build-data-centers-in-this-latin-american-country-strengthening-its-technological-influence-in-the-region/
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026; datasheet WTC_MLCC_Middle_and_High_Voltage.pdf; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

When did AWS switch on its region in Chile?

On 11 November 2026, El Cronista reported on 18 November. The region has three data-centre zones in the Santiago Metropolitan Region and opens first to a group of customers.

What is a high voltage MLCC used for in data-centre power equipment?

Snubbers across switches, resonant and timing stages, flyback clamps and filtering on DC buses near 400 V. These positions usually call for 630 V or 1,000 V parts.

How many Walsin 1206 MLCC are rated 630 V or more?

We counted 560 distinct part numbers, 363 in C0G/NP0 and 197 in X7R, from 630 V to 2,500 V.

Can a high voltage MLCC be used as a Y capacitor?

No. A capacitor across the mains needs a safety-certified part. Walsin’s S2 series is the X1/Y2 safety line; check its datasheet and confirm with your compliance team.

Are Walsin high voltage MLCC in stock in Hong Kong for buyers in Chile?

27 of the 560 1206 parts at 630 V or more were on our shelf in Hong Kong in the snapshot dated 9 November 2026. The rest are supplied to order; request a quote and we confirm availability, date code and lead time.

Is Venatech an authorised Walsin distributor for buyers in Chile?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Chile in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!