Venatech Limited: 2011 to 2026, Seven Authorised Lines
Venatech Limited, a Hong Kong passive component distributor since 2011: the timeline, the seven authorised brand lines, the entities and the stock held.
October 3, 2026
Venatech Limited, a Hong Kong passive component distributor since 2011: the timeline, the seven authorised brand lines, the entities and the stock held.
A chip resistor cross reference needs seven fields, not five. Rated power and TCR carry the decision, and 39,576 Walsin codes will not paste cleanly.
A six-step plan to qualify replacement capacitor candidates: dimensional check, reflow limits, board flex, electrical set, stress and records. Walsin data.
When not to substitute a component: part-specific safety ratings, AEC-Q200 grades, soft termination and RF loss. Walsin data on five cases to leave alone.
MLCC thickness tolerance is asymmetric and series-specific. One 0603 X7R 100 nF 50 V spec splits into 0.95 mm and 1.10 mm worst case. Real Walsin data.
A cross reference to Walsin matches five fields against a published catalogue. Two tools, two designs: a named list of 22 vendors, or no vendor step.
A BOM cross reference tool needs clean part numbers. Two faults break pasted lines: an embedded space in 39,576 Walsin codes, and a missing CT suffix.
How to read a cross reference: the five fields a tick covers, the four it does not, and why one 0603 X7R 100nF 50V line returns 13 Walsin parts.
No. A cross result is a specification match. Five Walsin parts fit one 0603 X7R 100nF 50V line across three terminations and two qualification grades.
Cross reference accuracy means naming what differs. One 1210 X5R 10uF 25V line matches two Walsin parts whose published thickness is 1.65 mm apart.