NEWS

MOV Varistor for AI Data-Centre Power in Finland: Oulu Joins a Four-Country AI Gigafactory Bid, and 51 Walsin Varistors Rated 275 to 320 VAC

Nokia, Telia, Nscale, Verda and Skeleton have formed AI Gigafactory Northern, a bid with sites in Oulu, Estonia, Latvia and Sweden, Nokia announced on 16 November 2026. Every server supply on a 230 V feed needs surge protection, and Walsin Technology (Walsin) lists 51 MOV varistors rated 275 to 320 VAC. Venatech is the authorised Walsin distributor in Hong Kong.


An AI gigafactory is a power project before it is a computing project. Whatever the final GPU count, each rack sits behind rectifiers, power-distribution units and server supplies, and each of those has a surge stage on its AC input. This note is for engineers in Finland who design or qualify that equipment, and for buyers who source the parts. The consortium is only a bidder, and nothing in the announcement names a power-supply or component maker; we make no claim about anyone’s bill of materials. What we add is a count. On 20 November 2026 we parsed Walsin’s varistor export (Venatech_MOV_Upload_01.xlsx onward) for the voltage rungs that suit a 230 V supply, and listed the disc sizes and surge ratings behind them.

What is the AI Gigafactory Northern bid, and where does Finland fit?

A five-company bid with a Finnish site. Nokia announced on 16 November 2026 that it has formed AI Gigafactory Northern with Nscale, Skeleton, Telia and Verda, a federated AI infrastructure project with sites in Oulu in Finland, Iru in Estonia and Valmiera in Latvia, plus a Swedish site still to be chosen.

According to the announcement, Nokia brings the network linking the sites, Telia connectivity and operations, Nscale and Verda the cloud platforms, and Skeleton high-power systems to make the data centres more efficient and stable and to ease strain on the grid. Evertiq added on 18 November 2026 that VTT and KTH Royal Institute of Technology are research partners, and that the consortium plans to bid in the EuroHPC Joint Undertaking call for AI gigafactory consortia. Nokia places the bid within the EU’s InvestAI initiative, which aims to mobilise 30 billion euros. The tender will decide whether it is built; for Finnish suppliers, the signal is that Oulu is named as a site in a gigawatt-class European programme.

Where does a mov varistor sit in AI data-centre power?

At the AC input of almost every power stage. A mov varistor clamps mains surges before they reach the rectifier; in a server supply or PDU it sits across the line just after the fuse, and its rating must stay above the highest normal mains voltage while still clamping below what the electronics can survive.

In AI halls the stakes are higher than in a small office. A rack can draw tens of kilowatts through several supplies in parallel, and a switching event or a lightning-induced surge on the feed reaches all of them at once. The MOV is cheap, but its choice sets three things: the continuous working voltage, the peak surge current it can take, and how many surges it survives before it ages. Larger discs take more current and more surges. Skeleton’s role in the bid is high-power systems that smooth the load, which tells you the power side is designed as carefully as the compute side. Our note on MOV peak current per square millimetre shows how disc area turns into surge rating, and the Walsin catalogue MOV_catalog.pdf holds the pulse-life curves.

How many Walsin varistors are rated 275 to 320 VAC?

Fifty-one. We counted 51 distinct Walsin MOV part numbers at a maximum working voltage of 275, 300 or 320 VAC: 17 at each rung, across four series and disc sizes from 5 mm to 53 mm, with peak surge ratings from 400 A to 80,000 A.

Series in the export Disc sizes at 275 to 320 VAC Parts Peak current range
Standard (D Series) 5, 7, 10, 14, 20, 25 mm 18 400 A to 18,000 A
High Energy (E Series) 5, 7, 18 mm 9 800 A to 9,000 A
Super High Energy (V Series) 10, 14, 20 mm 9 4,000 A to 13,000 A
Industrial 32, 40, 53 mm and 34 mm square 15 30,000 A to 80,000 A
All four 5 mm to 53 mm 51 400 A to 80,000 A

The part number carries the rating. In SR431K14D, 431 is the 430 V varistor voltage that pairs with 275 VAC working, K is ±10 %, and 14 is the disc size in millimetres; SR471K14D and SR511K14D are the 300 and 320 VAC rungs on the same disc. The whole varistor export holds 379 parts. Check the datasheet before approval: the clamping voltage, energy rating and pulse-life curve come from Walsin’s catalogue, not from the export. The varistor range page links it.

Which disc size fits which position on a 230 V supply?

It depends on where the part sits. For a 230 V feed, a 275 VAC rung gives margin over a supply running 10 % high, at 253 V; the disc size then follows the surge the position must take, from a 10 mm or 14 mm disc in a server supply to a 32 mm or larger industrial part at the facility entry.

Walsin part Working voltage Disc, series Peak current Match / mismatch (fit)
SR431K10D 275 VAC 10 mm, D 2,500 A Fit: compact server-supply input
SR431K14D 275 VAC 14 mm, D 4,500 A Fit: server supply or PDU input
SR431K14E 275 VAC 14 mm, V 8,000 A Fit: same footprint, higher surge rating
SR471K20D 300 VAC 20 mm, D 6,500 A Fit: rectifier shelf where swells are common
SR511K14D 320 VAC 14 mm, D 4,500 A Fit for wide-tolerance feeds; clamps higher
SR431K34RD 275 VAC 34 mm square, Industrial 80,000 A Fit: distribution-level surge stage
SR431K05D 275 VAC 5 mm, D 400 A Mismatch for mains input: too little surge capacity

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

We checked each of these seven against the export row by row, and the trade-off is plain: a higher voltage rung survives swells better but lets a higher clamping voltage through, so the parts behind it must tolerate more. Pick the lowest rung that clears your worst steady-state mains, then size the disc for the surge.

What should a data-centre power engineer in Finland check first?

Three things, in order. Before releasing a MOV for AI data-centre power in Finland, check the working voltage against the worst steady-state mains, the surge current and pulse life against the position, and the clamping voltage against what the rectifier and capacitors behind it can take.

Working voltage first, because a MOV that runs too close to the mains slowly heats and ages. Surge and pulse life second: the catalogue’s derating curve tells you how many surges of a given size the disc survives. Clamping voltage third, which links the MOV to the rest of the input stage. Our note on MOV varistors for data-centre power in Canada covers the higher rungs for 400 V three-phase. None of this is electrical-code advice; installation and safety requirements in Finland are for your compliance team and electrical designer to confirm.

How Venatech helps

A surge-stage list in, Walsin varistors out. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a varistor list returns Walsin candidates with working voltage, disc size and surge rating stated.

Paste your part numbers into the cross-reference tool, or upload the supply or PDU BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, shows the lines on our shelf in Hong Kong; Walsin varistors are supplied to order through our authorised Walsin channel. We are Hong Kong-based, handle small lots for qualification and pilot builds in Finland, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.

The short version

Nokia, Telia, Nscale, Verda and Skeleton have formed AI Gigafactory Northern, with Oulu named as the Finnish site, Nokia announced on 16 November 2026. Every server supply and PDU on a 230 V feed needs a surge stage, and the MOV sets its working voltage and surge rating. Walsin lists 51 varistors at 275, 300 and 320 VAC, from 5 mm discs at 400 A to industrial parts at 80,000 A.

Send us the varistors from your supply or PDU, and we will return Walsin crosses with voltage, disc and surge rating stated. Which rung does your input stage really need?

Related reading

Last reviewed: 20 November 2026

Sources

Fetched 20 November 2026.

  • Nokia announcement of the AI Gigafactory Northern consortium, as republished by HPCwire (AIwire), 16 November 2026: https://www.hpcwire.com/aiwire/2026/11/16/european-tech-leaders-form-ai-gigafactory-northern-consortium/
  • Evertiq, “Nokia joins consortium planning AI gigafactory across the Nordics and Baltics”, 18 November 2026: https://evertiq.com/news/2026-11-18-nokia-joins-consortium-planning-ai-gigafactory-across-the-nordics-and-baltics
  • Walsin varistor export, Venatech_MOV_Upload_01.xlsx onward, re-measured 20 November 2026; Walsin catalogue MOV_catalog.pdf; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

What is AI Gigafactory Northern?

A consortium of Nokia, Nscale, Skeleton, Telia and Verda, announced on 16 November 2026, that plans to bid in the EuroHPC call for AI gigafactories with sites in Oulu, Iru, Valmiera and Sweden.

Is the Oulu AI gigafactory confirmed?

No. The consortium is a bidder, and the EuroHPC tender will decide whether the facility is built.

What voltage mov varistor suits a 230 V supply in Finland?

A 275 VAC rung is a common starting point, since it clears a 230 V supply running 10 % high. Use 300 or 320 VAC where swells are frequent, and accept a higher clamping voltage.

How many Walsin varistors are rated 275 to 320 VAC?

We counted 51 part numbers, 17 at each of 275, 300 and 320 VAC, across disc sizes from 5 mm to 53 mm and peak ratings from 400 A to 80,000 A.

What does SR431K14D mean in a Walsin part number?

431 is the 430 V varistor voltage, paired with 275 VAC working; K is ±10 %; 14 is a 14 mm disc; D is the Standard series.

Is Venatech an authorised Walsin distributor for Finland?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Finland in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!