NEWS

0603 X7R MLCC for EMS in Mexico: 20 New Plan México Industrial Parks Take In Electronics Makers, and 58 Walsin 0603 X7R Capacitors on Our Hong Kong Shelf

Mexico delivered 20 more industrial parks under Plan México, with electronics and medical devices named as key markets, Mexico News Daily reported on 23 October 2026. New lines start with 0603 X7R MLCC: Walsin Technology (Walsin) lists 1,288, and 58 are on our Hong Kong shelf. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for buyers, NPI engineers and materials planners at EMS and electronics plants in Mexico. A new industrial park is floor space, not a bill of materials, and we make no claim about which companies have moved in or what they build. The link to our work is practical: a new SMT line in Nuevo León or Querétaro runs its first jobs on the commonest passives there are, and the 0603 X7R MLCC is near the top of almost every list. On 20 November 2026 we parsed all eight files of Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 distinct part numbers) and matched every 0603 X7R line against our ready-stock snapshot dated 9 November 2026.

What did Mexico announce about new industrial parks?

Twenty parks in eight states. Mexico News Daily reported on 23 October 2026 that 20 new industrial parks were delivered under Plan México, bringing the total to 40 of the 100 projected, with investment of between 670 million and 763 million US dollars and potential for 32,127 jobs.

The report places the 20 parks in 17 municipalities across Baja California, Coahuila, Nuevo León, the State of Mexico, Aguascalientes, Guanajuato, Querétaro and Mexico City, with ten of them in Coahuila and Nuevo León. It gives 4.6 million square metres of space housing roughly 175 companies, says all 20 parks already have companies installed and operating, and names electronics, medical devices, logistics and e-commerce as key markets. Across all 40 parks, the report cites AMPIP figures of 26 developers in 14 states, more than 1.4 billion US dollars of investment and more than 8.2 million square metres. We have no list of tenants and do not name any.

Why do new parks matter to an 0603 X7R MLCC buyer in Mexico?

Because a new line’s first BOMs lean on the same few passives. On a typical control, power or medical-electronics board, 0603 X7R MLCC from 10 nF to 1 µF do the decoupling and filtering on 3.3 V, 5 V, 12 V and 24 V rails, and they are often the highest line count on the reel list.

That makes them the first parts a new plant in Mexico has to qualify and buy, usually before volume is known. Three checks decide whether a cross is safe: the rated voltage against the rail with margin, the capacitance left at that voltage, and the series, because an automotive or medical customer may require AEC-Q200 or soft termination where a consumer board does not. Our guide to crossing an 0603 X7R line from Murata to Walsin works through those checks at series level, and the X7R capacitance ladder shows where the value steps thin out.

How many Walsin 0603 X7R MLCC are there?

One thousand two hundred and eighty-eight. We counted 1,288 distinct Walsin 0603 X7R MLCC across six series, of 4,715 distinct 0603 parts in all dielectrics; 648 sit in the General Purpose series and the rest in automotive, soft-termination and high-voltage lines.

Walsin series (0603, X7R) Part numbers On our shelf in Hong Kong (snapshot 9 Nov 2026)
General Purpose 648 50
Automotive, AEC-Q200 (MT) 219 to order
Soft Termination (SH) 191 3
Automotive without AEC-Q200 (MG) 130 to order
Middle to High Voltage 66 5
Automotive Soft Termination, AEC-Q200 (ST) 34 to order
Total 1,288 58

Of the 58 shelf lines, 50 are General Purpose parts, 5 are 200 V and 250 V parts in the Middle to High Voltage series and 3 are soft-termination SH parts, including SH18B104K500 at 100 nF and 50 V. The automotive MT, MG and ST lines are supplied to order. The 50 General Purpose lines run from 180 pF to 2.2 µF: 23 rated 50 V, 9 at 16 V, 8 at 25 V, 8 at 100 V, one at 10 V and one at 6.3 V. The General Purpose series as a whole reaches 4.7 µF in 0603 and runs from 6.3 V to 250 V. We have not seen this shelf cut counted anywhere else. The full MLCC range lists the C0G and X5R lines for the same case.

Which 0603 X7R MLCC fits which board rail?

Pick the rated voltage with margin over the rail. Every part in this table was on our shelf in Hong Kong on 9 November 2026; a 100 nF 0603 X7R part comes in five shelf ratings, from 10 V to 100 V, so the cross can follow the rail.

Walsin part Capacitance Rated voltage Match / mismatch for decoupling a 12 V rail on an EMS board built in Mexico Your incumbent
0603B104K500 100 nF 50 V Match, with wide voltage margin
0603B104K250 100 nF 25 V Match, with about twice the rail voltage
0603B104K101 100 nF 100 V Match; suits 24 V and 48 V rails too
0603B105K250 1 µF 25 V Match for bulk decoupling; check capacitance under bias
0603B474K250 470 nF 25 V Match for local filtering
0603B103K500 10 nF 50 V Match for high-frequency filtering beside the pin
0603B104K100 100 nF 10 V Mismatch for 12 V; fits a 3.3 V or 5 V rail
0603B225K6R3 2.2 µF 6.3 V Mismatch for 12 V; fits a 3.3 V rail

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Put the incumbent from your customer’s BOM in the last column and compare voltage, tolerance and series line by line. Check the datasheet. The export gives rated voltage but no DC-bias curve, so the capacitance left at your rail voltage comes from Walsin’s General Purpose sheet (WTC_MLCC_General_Purpose.pdf). If the customer specifies AEC-Q200, cross to the MT series instead; our note on MT vs MG automotive MLCC explains the split.

How do small lots from Hong Kong fit a new line in Mexico?

They cover the first builds. A new line in Mexico usually runs prototypes and pilot lots before volume, and 58 of Walsin’s 1,288 0603 X7R MLCC were on our shelf in Hong Kong on 9 November 2026 for exactly that stage.

For lines that are not on the shelf, request a quote and we source them through our authorised Walsin channel. We confirm availability, date code and lead time on each quote and make no stock or delivery promise. Through our supplier network in Hong Kong we also source passives from most other brands on request, including spot buys when a line is short of parts; Walsin is the line we are authorised for. Our ready-stock snapshot carries the full list of shelf lines with its date.

How Venatech helps

How Venatech helps is one BOM check that covers the whole reel list. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a customer BOM returns Walsin candidates with voltage, dielectric and series stated.

Upload the board BOM or paste single part numbers into the cross-reference tool, and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve plants in Mexico in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.

The short version

Mexico News Daily reported on 23 October 2026 that 20 more Plan México industrial parks were delivered, ten in Coahuila and Nuevo León, with electronics and medical devices among the key markets. New SMT lines start on 0603 X7R MLCC. Walsin lists 1,288 of them across six series, and 58 were on our shelf in Hong Kong on 9 November 2026, 50 in the General Purpose series from 180 pF to 2.2 µF.

Send us the passives list from your first customer BOM and we will return Walsin crosses with the shelf lines marked. Which 0603 capacitor on your 12 V rail is rated only 10 V?

Related reading

Last reviewed: 20 November 2026

Sources

Fetched 20 November 2026.

  • Mexico News Daily, “20 new industrial parks delivered, bringing to 40 the total under Sheinbaum’s Plan México”, 23 October 2026: https://mexiconewsdaily.com/business/20-new-industrial-parks-bring-to-40-total-under-sheinbaums-plan-mexico/
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026; datasheet WTC_MLCC_General_Purpose.pdf; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

How many Plan México industrial parks have been delivered?

Forty of the 100 projected, after 20 new parks were announced, Mexico News Daily reported on 23 October 2026. Ten of the 20 new parks are in Coahuila and Nuevo León.

Which sectors are the new industrial parks in Mexico aimed at?

The report names electronics, medical devices, logistics and e-commerce as key markets, and says all 20 parks already have companies operating.

How many Walsin 0603 X7R MLCC are there?

We counted 1,288 distinct part numbers across six series, including 648 General Purpose, 219 AEC-Q200 MT and 191 soft-termination SH parts.

Which Walsin 0603 X7R MLCC are in stock in Hong Kong?

58 lines were on our shelf in Hong Kong in the snapshot dated 9 November 2026, 50 of them in the General Purpose series from 180 pF to 2.2 µF. The rest are supplied to order.

What voltage should a 0603 X7R capacitor have on a 12 V rail?

Choose a rating with margin over the rail, such as 25 V or 50 V, and confirm the capacitance left at 12 V on the datasheet’s DC-bias curve. A 10 V part is a mismatch for a 12 V rail.

Is Venatech an authorised Walsin distributor for plants in Mexico?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves plants in Mexico in small lots. Other brands are sourced on request; Walsin is the line we are authorised for.


Share This, Choose Your Platform!