NEWS

X1 Y2 Capacitor for Malaysia’s Power Supply Makers: Delta Electronics Adds About 120 Million US Dollars to Its Malaysian Unit, and Walsin Lists 32 SMD Safety MLCC from 1 nF to 4.7 nF

Delta Electronics is putting about 491 million ringgit, roughly 120 million US dollars, into its Malaysian unit to expand production sites, TechNode Global reported on 18 November 2026. For Malaysian teams choosing an X1 Y2 capacitor in surface-mount form, Walsin lists 32 SMD safety MLCC from 1 nF to 4.7 nF. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for design engineers and buyers at Malaysian makers of power supplies, adapters, chargers and industrial power modules, and at the EMS lines that build them. The news is one company’s capital decision; we say nothing about where Delta buys parts, which products the new capacity will make, or which sites are involved beyond what the report states. The engineering question it points to is a common one on any mains-connected board: the Y-capacitor between primary and secondary, and whether it can move from a leaded disc to a surface-mount part. On 20 November 2026 we re-measured the MLCC export of Walsin Technology (Walsin), Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 part numbers), filtered the safety-certified S2 series, and checked the result against our ready-stock snapshot dated 9 November 2026.

What did Delta Electronics announce for its Malaysian unit?

A capital injection of about 120 million US dollars. TechNode Global reported on 18 November 2026 that Delta Electronics International (Singapore) subscribed for 490.9 million new shares at one ringgit each in Delta Electronics International (Malaysia), its wholly owned unit, “to expand production sites”, according to a filing dated 16 November.

According to the report, the deal takes Delta’s cumulative holding in the Malaysian unit to 612.3 million shares, about 150 million US dollars. Delta describes itself as a provider of power, thermal and automation solutions. The article does not say where in Malaysia the new capacity will go or what it will build, and we do not guess. We use the report only as a sign that power-electronics manufacturing in Malaysia is still adding capacity in late 2026; nothing here is investment advice.

Where does an X1 Y2 capacitor sit in a power supply?

Across the isolation barrier and across the line. In an offline power supply, Y2 capacitors bridge primary and secondary ground, or line and protective earth, to return common-mode noise; X1 or X2 capacitors sit line to line. An X1 Y2 capacitor is certified for both duties, and a failure must not create a shock hazard.

Typical Y-capacitor values in adapters and open-frame supplies run from about 1 nF to 4.7 nF. The ceiling is set by the leakage-current limit of the end-product safety standard, not by the capacitor, so a designer often wants the largest value that keeps touch current inside the limit. Leaded ceramic discs have done this job for decades. A surface-mount safety MLCC removes a manual or wave-solder step and frees board height, which matters on slim adapters and on high-density server and telecom supplies. The trade-off is creepage: an SMD part has a short body, so pad layout and slots decide whether the board meets its clearance figure. Our explainer on X1/Y1 vs X1/Y2 safety capacitors covers the class differences.

How many Walsin SMD safety MLCC sit between 1 nF and 4.7 nF?

Thirty-two. We filtered the 23,360-row Walsin MLCC export to the safety-certified S2 series, which holds 160 distinct part numbers in X7R and C0G (NP0), and counted 32 X7R parts from 1 nF to 4.7 nF across four case sizes.

Here is how those 32 parts split by case and value, as we counted them on 20 November 2026:

Case 1 nF to 1.8 nF 2.2 nF to 2.7 nF 3.3 nF to 4.7 nF Part numbers
1808 3 0 0 3
1812 3 0 0 3
2211 8 4 0 12
2220 4 3 7 14
Total 18 7 7 32

Two points stand out. First, the higher values need a larger body: 2.2 nF starts at 2211, and every part from 3.3 nF to 4.7 nF is 2220. Second, the C0G parts in the S2 series stop well below 1 nF, so a Y2 position at 1 nF or more is an X7R part in this range. The export lists every S2 part at 5,000 V or 6,000 V, which we read as the test or impulse figure in the part code; the working AC rating sits on the datasheet. We have not seen this value-by-case split counted elsewhere.

Which Walsin part fits a 2.2 nF Y2 brief?

Three of the eight candidates below. Against a brief of 2.2 nF, ±10 percent or tighter, X7R, SMD, case 2220 or smaller, three Walsin S2 parts match on every field; five near neighbours miss on value or tolerance.

Walsin part Case Capacitance Tolerance Dielectric Match / mismatch for 2.2 nF, ±10% or tighter, X7R, 2220 or smaller Your incumbent
S252B222K502 2211 2.2 nF ±10% X7R Match, on our shelf
S252B222J502 2211 2.2 nF ±5% X7R Match, tighter tolerance
S255B222K502 2220 2.2 nF ±10% X7R Match, larger body
S252B222M502 2211 2.2 nF ±20% X7R Mismatch on tolerance
S252B182K502 2211 1.8 nF ±10% X7R Mismatch on value; lower touch current
S252B272K502 2211 2.7 nF ±10% X7R Mismatch on value
S255B472K502 2220 4.7 nF ±10% X7R Mismatch on value; check leakage budget
S243B102K502 1812 1 nF ±10% X7R Mismatch on value; smallest body here

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Put your incumbent part, disc or SMD, in the last column. If you are moving from a leaded 2.2 nF Y2 disc, compare the safety class, the certificate list and the creepage your layout gives you, not only the value. Paste the incumbent into VenaMatch and it returns the Walsin candidates with the differences stated.

Check the datasheet. The export gives case, value, tolerance, dielectric and the voltage code, but not the AC working voltage, the safety class wording or the certificate numbers. Read those on Walsin’s S2 datasheet, WTC_MLCC_Safety_Certified_S2.pdf, and confirm with your safety engineer that the part and your pad layout meet the creepage and clearance of your end-product standard. Qualify any change in your own circuit.

Is a Walsin SMD Y2 capacitor on the shelf in Hong Kong?

Yes, one line. We checked all 160 S2 parts against our ready-stock snapshot dated 9 November 2026: S252B222K502, the 2.2 nF ±10 percent X7R part in 2211, is on our shelf in Hong Kong (snapshot 9 Nov 2026).

On our shelf in Hong Kong (snapshot 9 Nov 2026) means the line was held on that date; it is not a promise of quantity or date code today. The other parts in the tables are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. The ready-stock page lists the other capacitors and resistors held on that date, and the MLCC range lists every Walsin series.

How Venatech helps

How Venatech helps is a mapped second source for the safety parts on your power board. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a leaded or SMD Y-capacitor list returns Walsin S2 candidates with value, case and tolerance differences stated.

Paste part numbers into the cross-reference tool, or upload a full power-supply BOM and request a quote through the site. The ready-stock snapshot is dated 9 November 2026. We are Hong Kong-based, ship small lots to Malaysian engineering and production teams, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.

The short version

Delta Electronics is adding about 491 million ringgit, roughly 120 million US dollars, to its wholly owned Malaysian unit to expand production sites, TechNode Global reported on 18 November 2026. For Malaysian power-supply designers, the X1 Y2 capacitor between primary and secondary is a part worth a second source. Walsin’s safety-certified S2 series lists 160 SMD parts, 32 of them X7R from 1 nF to 4.7 nF. Three match a 2.2 nF, ±10 percent brief, and S252B222K502 was on our Hong Kong shelf on 9 November 2026.

Send us the Y-capacitor and X-capacitor lines from your power board and we will return Walsin crosses with case and tolerance stated. Which safety capacitor on your board is still a leaded disc?

Related reading

Last reviewed: 20 November 2026

Sources

Fetched 20 November 2026.

  • TechNode Global, report on Delta Electronics raising its Malaysian unit’s capital by about 120 million US dollars, 18 November 2026: https://technode.global/2026/11/18/taiwans-delta-electronics-to-raises-malaysian-units-capital-by-120m/
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026; Walsin datasheet WTC_MLCC_Safety_Certified_S2.pdf; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

<!– wp:rank-math/faq-block {"questions":[{"id":"faq-question-01","title":"What did Delta Electronics announce for Malaysia in November 2026?","content":"TechNode Global reported on 18 November 2026 that Delta subscribed for 490.9 million new shares in its wholly owned Malaysian unit, about 120 million US dollars, to expand production sites.","visible":true},{"id":"faq-question-02","title":"What is an X1 Y2 capacitor?","content":"A safety capacitor certified for both X1 duty, line to line, and Y2 duty, line to earth or across the isolation barrier. A Y-rated part must not fail in a way that creates a shock hazard.","visible":true},{"id":"faq-question-03","title":"How many Walsin SMD safety MLCC are there from 1 nF to 4.7 nF?","content":"We counted 32 X7R parts in Walsin's S2 series from 1 nF to 4.7 nF, in 1808, 1812, 2211 and 2220. The series holds 160 part numbers in all.","visible":true},{"id":"faq-question-04","title":"Which Walsin part is a 2.2 nF SMD Y2 capacitor?","content":"S252B222K502 is 2.2 nF, ±10 percent, X7R in 2211. S252B222J502 is the ±5 percent version and S255B222K502 is the 2220 version.”,”visible”:true},{“id”:”faq-question-05″,”title”:”Can Malaysia buyers get Walsin safety MLCC in stock from Hong Kong?”,”content”:”S252B222K502 was on our shelf in Hong Kong in the snapshot dated 9 November 2026. Other S2 parts are sourced through our authorised Walsin channel, with availability confirmed on each quote.”,”visible”:true},{“id”:”faq-question-06″,”title”:”Is Venatech an authorised Walsin distributor for buyers in Malaysia?”,”content”:”Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Malaysia in small lots. Stackpole and Viking are lines we supply, not authorised lines.”,”visible”:true}],”listStyle”:””,”titleWrapper”:”h3″,”titleCssClasses”:””,”contentCssClasses”:””,”sizeSlug”:””} –>

What did Delta Electronics announce for Malaysia in November 2026?

TechNode Global reported on 18 November 2026 that Delta subscribed for 490.9 million new shares in its wholly owned Malaysian unit, about 120 million US dollars, to expand production sites.

What is an X1 Y2 capacitor?

A safety capacitor certified for both X1 duty, line to line, and Y2 duty, line to earth or across the isolation barrier. A Y-rated part must not fail in a way that creates a shock hazard.

How many Walsin SMD safety MLCC are there from 1 nF to 4.7 nF?

We counted 32 X7R parts in Walsin’s S2 series from 1 nF to 4.7 nF, in 1808, 1812, 2211 and 2220. The series holds 160 part numbers in all.

Which Walsin part is a 2.2 nF SMD Y2 capacitor?

S252B222K502 is 2.2 nF, ±10 percent, X7R in 2211. S252B222J502 is the ±5 percent version and S255B222K502 is the 2220 version.

Can Malaysia buyers get Walsin safety MLCC in stock from Hong Kong?

S252B222K502 was on our shelf in Hong Kong in the snapshot dated 9 November 2026. Other S2 parts are sourced through our authorised Walsin channel, with availability confirmed on each quote.

Is Venatech an authorised Walsin distributor for buyers in Malaysia?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Malaysia in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!